File:u value walls table.png: Difference between revisions

From the change wiki
(U-values needed for walls in a passivhaus design. Source: [https://blog.passivehouse-international.org/ug-uf-uw-uwhat-an-intro-to-the-u-value-and-those-most-important-to-passive-house-design/ Ug, Uf, Uw, Uwhat? : An intro to the U-value and those most ...])
 
Line 2: Line 2:
U-values needed for walls in a [[passivhaus]] design.
U-values needed for walls in a [[passivhaus]] design.


Source: [https://blog.passivehouse-international.org/ug-uf-uw-uwhat-an-intro-to-the-u-value-and-those-most-important-to-passive-house-design/ Ug, Uf, Uw, Uwhat? : An intro to the U-value and those most ...]
 
<small>
<cite>Source: [https://blog.passivehouse-international.org/ug-uf-uw-uwhat-an-intro-to-the-u-value-and-those-most-important-to-passive-house-design/ Ug, Uf, Uw, Uwhat? : An intro to the U-value and those most important to Passive House design]</cite>
 
Description: <q>Maximum heat transfer coefficient for opaque building components (walls). f<sub>PHI</sub> is the reduction factor: always 1, exception: areas in contact with the ground and towards the unheated basement in the climate zones 1-4: 0.6 |Table adapted from [https://passiv.de/downloads/03_certification_criteria_construction_systems_en.pdf Certification Criteria for Opaque Passive House Construction Systems]</q>
</small>

Revision as of 01:54, 3 June 2023

Summary

U-values needed for walls in a passivhaus design.


Source: Ug, Uf, Uw, Uwhat? : An intro to the U-value and those most important to Passive House design

Description: Maximum heat transfer coefficient for opaque building components (walls). fPHI is the reduction factor: always 1, exception: areas in contact with the ground and towards the unheated basement in the climate zones 1-4: 0.6 |Table adapted from Certification Criteria for Opaque Passive House Construction Systems

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current01:47, 3 June 2023Thumbnail for version as of 01:47, 3 June 2023456 × 310 (16 KB)Elie (talk | contribs)U-values needed for walls in a passivhaus design. Source: [https://blog.passivehouse-international.org/ug-uf-uw-uwhat-an-intro-to-the-u-value-and-those-most-important-to-passive-house-design/ Ug, Uf, Uw, Uwhat? : An intro to the U-value and those most ...]

The following page uses this file:

Metadata